How To Install Blinds On Window Frame

Download Commodity

Download Commodity

Rather than spending large bucks to become someone to install your blinds for y'all, why not do it yourself? The process isn't as difficult equally it might sound. To install blinds, measure the dimensions for an inside or exterior mount and purchase blinds specific to those measurements; attach the brackets using a drill, place the head rails into the brackets, attach the valence to the caput track, and secure the blind wand to complete the procedure.

1. 

   one

   Measure your windows. You demand to exercise this to make certain that y'all purchase the correct size of blind.^[1] Utilize a measuring tape to decide the size of the window. You lot can either mount your blinds on the within or on the outside of the casing. If you hang your blinds on the exterior, your window (and the blinds) volition look larger. Hanging the blinds on the inside gives your window a slimmer expect. Within mounts also permit more light to shine around the edges of the blinds.^[ii]

   • Measuring for an outside mountain: Measure along the exterior edges of the casing that surrounds the window. Measure the verbal length from the top of the casing to the bottom of the casing (or to the sill if your window has one).

     

   • Measuring for an inside mount: Put your measuring tape inside the casing where the glass of the window meets the casing. Measure the width of the window at the top, middle and bottom. If there is whatever deviation in the numbers, use the smallest figure to base of operations your measurements off of.

     

2. 

   2

   Purchase your blinds according the measurements you made. There are many different kinds of blinds to choose from--vinyl, PV, aluminum, forest--and the choice yous make will have to be based on personal preference.^[3]

   • If you plan on putting aluminum blinds in a plant nursery or your child'due south room, make sure that the blinds you choose are painted with certified lead-costless paint.
   • White blinds tin can give your infinite a nice, clean await.^[4]

   Advertizing

3. 3

   Make your mounting marks. Unpack your blinds and make sure all of the parts are at that place. If there are instructions that come with your blinds, follow them along with the steps listed here. You will demand to make some pencil marks and so that you know where to place your brackets.^[5]

   • For an outside mount: Agree the blind up so that the caput rail (the acme part of the bullheaded) is centered and leveled with your window's casing (the two vertical slats that grade the 'frame' of the window). Brand a pencil marking right below the caput rail on each side of the casing. You should also make a mark ¼ of an inch by the end of each head rail.

     

   • For an inside mount: Identify the head rail inside the casing. It should be level--keep your handrail level, even if your window is not. Make pencil marks beneath the caput runway on each end.

     

   Advertisement

1. 

   i

   Open the bracket door and hold the end brackets in identify. Identify them within the pencil marks you have made. At that place are two open sides to the bracket--one of them should face out towards you, while the other should face in towards the center of the window. The bracket door must face towards the inside of the room.

   • If your bracket door is tricky to utilise, consider trying to open it with one of your fingers and a screwdriver.

2. 2

   Marker where you volition be drilling. Using your pencil, marker the spots where yous will need to drill your pilot holes (there should exist two of them). You should choose two diagonal holes to drill into then that your brackets are sturdier. Take the brackets away and agree up a level to the two holes are fifty-fifty.^[half-dozen]

   • For an exterior mount: The brackets should be placed on the outside face of the window casing on both sides of the window.

     

   • For an within mount: The brackets should be placed upwardly against the inside top corner of each side of the window.

     

3. 

   3

   Drill the holes for the screws. Each bracket comes with two screws. If you are drilling into forest, use a 1/16-inch bore drill bit to brand a hole that is slightly smaller than the screw that you lot volition apply to secure your bracket. Supplant the subclass and drill your screws into place.^[7]

   • If you are drilling into drywall, plaster, concrete, tile, stone, or brick, employ advisable screws, anchors, or plugs and follow the specific instructions that come with them.

   Advertisement

1. 

   ane

   Snap the valance clips in place. Valance clips are used to adhere the head rail to the valance. The valance is what covers the head runway and makes it look a fleck more decorative. The valance clips should be snapped over the front end lip of the head rails earlier the head rail is inserted into the bracket.^[8]

   • Your blinds may be made upward of 'ladders' of blinds. If this is the case, snap each valance prune into place next to the meridian of each ladder--not straight on top of it. If they are put directly over each ladder, the valance clips might get caught in the cords of the blinds.

2. 

   two

   Identify the caput rail into the brackets. One time y'all have finished drilling the brackets into identify, make sure the bracket doors are wide open then insert the head rails into the brackets. When you lot have situated the head track, snap the bracket doors closed. You should hear an audible snapping noise.

3. 

   3

   Attach the valance. Place the valance along the caput track in the position you would like it to be in. Residuum it on top of the valance clips. When you have positioned it the way you lot would like it be, press gently downwardly then that the valance clips snap into the valance, holding it in place.^[9]

4. 

   4

   Secure the blind wand. If your blinds came with a wand for opening and endmost them, and it did not come pre-fastened, attach it at present. Push the plastic sleeve of the claw up, insert the wand's end into the claw, and then slide the plastic covering back down.

   Advertisement

Add New Question

• Question

  Should bedrooms have drapes or blinds?

  

  Karen Parziale is a Home Stager, Home Organizer, and the Founder of The Existent Manor Staging Studio based in Hoboken, New Jersey. Karen has over 15 years of home staging and decorating experience and has staged over five,000 homes. She specializes in project management, space planning, material selections and builder/architect/client relationships

  

  Abode Stager & Interior Designer

  Expert Answer

  Accept a wait at the size of your windows starting time. If your bedroom has really big, sprawling windows, yous might be better off choosing going with drapes.

• Question

  Which type of blinds are best?

  

  Karen Parziale is a Home Stager, Domicile Organizer, and the Founder of The Real Manor Staging Studio based in Hoboken, New Jersey. Karen has over 15 years of home staging and decorating feel and has staged over v,000 homes. She specializes in projection management, infinite planning, material selections and builder/architect/customer relationships

  

  Home Stager & Interior Designer

  Expert Respond

  Faux blinds are great! They're virtually two in (v.08 cm) thick and are a lot more stylish-looking than aluminum blinds.

• Question

  Tin I hand spiral in the brackets? I accept no drill.

  

  It depends on what the wall is fabricated of. If it is wood, information technology volition be very difficult.

• Question

  How practise I go about installing center support bracket?

  

  Centre back up brackets can be a claiming to install. However, the method I found most success with is to apply a sparse layer of gorilla glue to the backboard. Then you attach the center back up bracket to the gum.

• Question

  How practise I install regular, cheap pull-down blinds?

  

  Place the end brackets onto the blinds. Agree the blinds up to the window top where you lot want them to hang; mark the window elevation at the edges of the brackets with a pencil. Remove the two brackets from the blinds. Property each bracket on the pencil lines, identify a dot inside the bracket holes: this is where y'all will drill holes for the screws that concord the brackets. Drill (or nail) the holes where you marked. Attach each bracket with screws, and open the brackets. Slide in the blind and shut each bracket. The pull-down string should be on the right, the slot turn rod on the left.

• Question

  How do I install top-mounted mini blinds?

  

  Is it going within of a soffit? Anyway, ordinarily at that place is a track, and it snaps into the brackets. Install the brackets and use a central bespeak for all brackets. (3brackets per 6'+ of runway) let'southward say your first bracket will be ii inches abroad from the window, install your next two brackets 2 inches away from the window. Concur the rail with both easily put the back side in first and and so clip the front end. I find securing the right side first and then the left side adjacent is the easiest mode. Then merely clip in the vertical vanes and you lot are good to become.

Ask a Question

200 characters left

Include your email address to go a bulletin when this question is answered.

Submit

Advertisement

• Always read the instructions provided with your blinds.

• Get someone to assistance you hold the blinds upwardly. If you have never operated a drill, get someone who knows how to utilize information technology to help you.

Ad

Things You'll Need

• Blinds (with brackets, head rail, valance, valance clips)
• Tape Measure
• Level
• Pencil
• Drill
• Screws

About This Article

Commodity Summary 10

To install blinds, offset by making marks on the wall where you desire to hang the blinds, either inside the window frame or on the wall above information technology, depending on your preference. Next, open the door on the each mounting subclass and line information technology up with the mark you fabricated. And so, attach the brackets by drilling screws through the holes on the back of the bracket. Once the brackets are attached, snap the valance clips onto the head rail of the blinds before placing the track into the brackets. Finally, shut the bracket doors and adhere the valance to the head rails. For tips on how to measure your windows earlier ordering blinds, read on!

Did this summary assistance you?

Thank you to all authors for creating a page that has been read 504,022 times.

Did this article assist you?

Source: https://www.wikihow.com/Install-Blinds

Posted by: sandersonguitterotice.blogspot.com

Share this post